Characteristic and mechanism of sorption and desorption of benzene on humic acid

Environmental Science and Pollution Research - The sorption/desorption behaviors of benzene, toluene, ethylbenzene, and xylene (BTEX) on soil organic matter (SOM) have a significant influence on...     

The associations of air pollution exposure during pregnancy with fetal growth and anthropometric measurements at birth: a systematic review and meta-analysis

Environmental Science and Pollution Research - Fetal growth has been demonstrated to be an important predictor of perinatal and postnatal health. Although the effects of maternal exposure to air...     

Eutrophication conditions and ecological status in typical bays of Lake Taihu in China

Sampling was conducted at three site groups, group E (in East Taihu Bay), G (in Gonghu Bay) and M (in Meiliang Bay) in Lake Taihu. TN and TP concentrations among site groups was in the increasing order of E < G < M. TP level at G sites is at the critical threshold for loss of submersed macrophytes. Mean values of DO and Transparence showed different trend, i.e., E > G > M. The mean phytoplankton fresh-weight biomass at M sites was 5.81 mg/l, higher than that at E sites (4.96 mg/l) and G sites (5.18 mg/l). Mean zooplankton fresh-weight biomass was in the decreasing order of M (6.4 mg/l) > G (4.9 mg/l) > E (2.7 mg/l). However, Rotifera density was in the sequence of E > G > M. Both zooplankton biomass and phytoplankton biomass increased with the rise of TN and TP concentrations. Relationships between zooplankton biomass and phytoplankton biomass showed that zooplankton played a limited role in the control of algae in eutrophic lakes. Nutrient availability is much more important than zooplankton grazing pressure in controlling phytoplankton growth in lakes. For most sites in Lake Taihu, reduction of nutrient loading, as well as macrophyte conservation, zappears to be especially important in maintaining high water quality and regulating lake biological structure, but for M sites, it’s urgent to control nutrient inputs rather than to restore macrophyte community.     

京津冀城市群二氧化碳排放达峰研究

基于IPCC排放因子方法建立了2015—2019年京津冀城市群地级城市CO₂排放清单,基于经济增长与CO₂排放关系的脱钩系数法,得到京津冀城市群13个地级以上城市的脱钩情况,结合历史CO₂排放和脱钩情况提出的京津冀城市群达峰判别方法,对京津冀城市群地级以上城市CO₂排放达峰情况进行了判断。结果表明:近5年来,保定、张家口、秦皇岛、邢台、沧州、廊坊、衡水7市碳排放量暂未达到峰值状态;北京、天津、石家庄、承德、邯郸、唐山6个城市已经处于CO₂排放达峰状态。建议已经具备达峰条件的城市抓紧开展达峰行动方案,制定CO₂排放达峰目标。     

Phosphate recovery with granular acid-activated neutralized red mud: Fixed-bed column performance and breakthrough curve modelling

Granular acid-activated neutralized red mud (AaN-RM) has been successfully prepared with good chemical stability and physical strength. However, its potential for industrial application remains unknown. Therefore, the performance of granular AaN-RM for phosphate recovery in a fixed-bed column was investigated. The results demonstrated that the phosphate adsorption performance of granular AaN-RM in a fixed-bed column was affected by various operational parameters, such as the bed depth, flow rate, initial solution pH and initial phosphate concentration. With the optimal empty-bed contact time (EBCT) of 24.27 min, the number of processed bed volumes and the phosphate adsorption capacity reached 496.95 and 84.80 mg/g, respectively. Then, the saturated fixed-bed column could be effectively regenerated with a 0.5 mol/L HCl solution. The desorption efficiency remained as high as 83.45% with a low weight loss of 3.57% in the fifth regeneration cycle. In addition, breakthrough curve modelling showed that a 5-9-1 feed-forward artificial neural network (ANN) could be effectively applied for the optimization of the fixed-bed adsorption system; the coefficient of determination (R²) and the root mean square error (RMSE) evaluated on the validation-testing data were 0.9987 and 0.0183, respectively. Therefore, granular AaN-RM fixed-bed adsorption exhibits promising potential for phosphate removal and recovery from polluted water.     

南京八卦洲农用地表层土壤重金属分布特征及风险评价

为查明南京八卦洲土壤重金属污染物类型及其影响范围,于2017年12月在洲内采集了471个表层土壤样品,测定了pH及As、Cd、Cr、Cu、Hg、Ni、Pb、Zn等8种重金属元素浓度,采用单因子指数法、内梅罗综合指数法和潜在生态危害指数法进行了污染风险评价。研究结果表明:As、Cd、Cr、Cu、Hg、Ni、Pb和Zn平均浓度分别为10.66、0.32、86.74、43.25、0.10、40.34、33.50和108.33 mg·kg-1,除As、Hg元素外,其余6种元素均超过南京市背景值,出现大范围的富集;Cd元素为研究区主要污染物,绝大部分为Ⅱ级轻微污染,均分布于八卦洲服务区附近的中、酸性土覆盖区,需做好安全利用措施。从全区来看研究区大部分农用地土壤处于安全生产级别,仅有少部分区域处于Ⅱ级和Ⅲ级风险水平,总体上潜在生态危害较低。     

成都市工业挥发性有机物排源成分谱

选取成都市汽车制造和石油化工等典型工业行业,通过瓶采样和SUMMA罐采样及GC-MS分析方法,研究了不同生产工艺环节的挥发性有机物(VOCs)排放特征.结果表明,汽车制造各工艺环节均有各自的优势组分,其中喷漆排放以烷烃(32%)和芳香烃(35%)为主.家具制造排放特征与使用原辅料高度相关,以芳香烃(50%)和OVOCs(38%)为主.石油化工各装置区VOCs浓度范围为49～1 387μg·m~(-3),不同装置区存在较大差异,主要是由于炼油区主要产品为C_5～C_9的汽油和苯系物等,化工区则较多使用了溶剂同时生成烯烃类产品.电子制造均以OVOCs为主,占VOCs总排放的50%以上.制鞋行业排放VOCs主要由烷烃和OVOCs贡献,平均占比分别为52%和36%,与所用溶剂组分高度相关.汽车制造VOCs排放组分差异较大,主要以正十二烷和2-丁酮等为主.家具制造排放组分主要为苯乙烯、乙酸乙酯和间/对-二甲苯等,为涂料和稀释剂的典型组分.石油化工各装置区排放组分有差异,炼油区以苯乙烯等为主,化工区主要为1,3-丁二烯等,仓储区主要为C_3～C_5烷烃等,废水处理则主要为C_6～C_8烷烃等.电子制造主要组分均为乙醇和丙酮等醛酮组分.制鞋企业排放组分以C_5和C_6等烷烃为主.通过臭氧生成潜势计算比较,汽车制造和石油化工行业对臭氧生成潜势贡献较大的VOCs排放组分以烯烃和芳香烃为主,具有较高的污染源反应活性.研究表明各工业行业OVOCs排放比例(17%～96%)和对臭氧生成潜势贡献均较为显著,因此在进行VOCs排放控制时,除重点管控芳香烃和烯烃外,亦应提高对OVOCs组分的关注.     

DOC+CDPF对国III重型柴油货车实际道路排放的影响

利用便携式车载排放测试系统（PEMS）对2辆加装氧化催化转化器（DOC）和催化型柴油颗粒捕集器（CDPF）与否的国III重型柴油货车进行实际道路排放测试.结果表明,2辆改造重型柴油车的CO、THC、固态颗粒物粒数（SPN）和黑碳（BC）实际道路排放因子分别为（1.31±0.37）g/（kW×h）、（0.20±0.03） g/（kW×h）、（7.13×10¹⁰±5.27×10¹⁰）个/（kW×h）和（0.69±0.06）mg/（kW×h）,相对于原始排放（拆除DOC+CDPF）分别降低52.48%、55.69%、99.91%和99.22%.从低速、中速到高速,CO和THC减排比例呈现上升趋势,然而运行工况对SPN和BC减排比例则无显著影响.加装DOC+CDPF会导致NO₂在NO_x中的占比升高,且从低速、中速到高速涨幅依次增大,但对NO_x无明显减排效益,其排放因子为9.53~9.83g/（kW×h）,远高于实验室排放限值.     

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO_2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO_2 catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N_2 physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed desorption of CO_2(CO_2-TPD),temperature programmed desorption of NH_3(NH_3-TPD),and temperature programmed H2 reduction(H_2-TPR).The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases,higher surface area,and lower reduction temperature are all favorable for catalytic activity.The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS).Methanol appears to be formed via the bidentate-formate(b-HCOO) species undergoing stepwise hydrogenation,while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.     

关于在长江经济带布局以水质改善为目标的流域生态缓冲体系的思考

生态缓冲带能够有效减缓流域内的人类活动或自然过程对水环境和水生态系统的影响.在长江经济带构建流域生态缓冲体系,对长江生态保护修复具有十分重要的意义.讨论了构建流域生态缓冲体系涉及的生态缓冲带位置选择、缓冲体系所占最低面积比率、宽度划定等一些基本的原则要求;利用卫星遥感影像数据,提取各汇水单元的地形特征、土地利用类型特征、土壤类型、土壤侵蚀强度、水文水系等数据,对长江经济带流域生态缓冲体系进行布局.结果表明:①长江经济带内林草地是主要土地利用类型,占区域总面积的62.46%,但是分布很不均匀,主要集中在西部高地和中下游的丘陵地带,在人口密集、农田密集的区域分布偏少;城镇用地主要集中在长江中下游地区.②土壤类型空间差异显著,浙江省、江苏省、湖南省、江西省及安徽省大部分区域的土壤多是黏性比较大,污染物迁移能力较低;而污染物迁移能力较强的砂质土或者土层较薄的山地草甸土主要分布在四川省北部、西北部.水力侵蚀、风力侵蚀和冻融侵蚀均有分布,且以水力侵蚀为主,建议在中度及以上侵蚀强度区域尽量减少污染源,重点布置缓冲带,增加该区域的缓冲力度.③长江经济带范围内可以利用的中小型湿地、小型河流支浜的面积至少有1.4×104 km2,再结合林草缓冲带,就可以形成一个生态缓冲体系.④在土地利用类型分布结果基础上,叠加土壤侵蚀强度和水系分布,将污染源区、中度及以上侵蚀强度区、水体区作为缓冲对象,建立缓冲体系的重点区域,总面积约14.26×104 km2,占长江经济带总面积的6.95%.对照欧美地区的研究,6.95%的缓冲体系面积占比是偏低的,需要在长江经济带开展深入研究来确定适宜的缓冲体系面积比,推进长江经济带流域生态缓冲体系的构建.